607
[Sysname-ike-profile-prof1] proposal 10
Related commands
ike proposal
reset ike sa
Use reset ike sa to delete IKE SAs.
Syntax
reset ike sa [ connection-id connection-id ]
Views
User view
Predefined user roles
network-admin
Parameters
connection-id connection-id: Specifies the connection ID of the IKE SA to be cleared, in the range of
1 to 2000000000.
Usage guidelines
When you delete an IKE SA, the device automatically sends a notification to the peer.
Examples
# Display the current IKE SAs.
<Sysname> display ike sa
Connection-ID Remote Flag DOI
----------------------------------------------------------
1 202.38.0.2 RD IPsec
2 202.38.0.3 RD IPsec
Flags:
RD--READY RL--REPLACED FD-FADING RK-REKEY
# Delete the IKE SA with the connection ID 2.
<Sysname> reset ike sa connection-id 2
# Display the current IKE SAs.
<Sysname> display ike sa
Connection-ID Remote Flag DOI
----------------------------------------------------------
1 202.38.0.2 RD IPsec
Flags:
RD--READY RL--REPLACED FD-FADING RK-REKEY
reset ike statistics
Use reset ike statistics command to clear IKE MIB statistics.
Syntax
reset ike statistics
To Next Page
Loading...
