232
<Sysname> system-view
[Sysname] portal mac-trigger-server mts
[Sysname-portal-mac-trigger-server-mts] aging-time 300
Related commands
display portal mac-trigger-server
app-id
Use app-id to specify the APP ID for QQ authentication.
Use undo app-id to restore the default.
Syntax
app-id app-id
undo app-id
Default
An APP ID for QQ authentication exists.
Views
QQ authentication server view
Predefined user roles
network-admin
Parameters
app-id: Specifies the APP ID for QQ authentication.
Usage guidelines
To use QQ authentication for portal users, you must go to the Tencent Open Platform
(http://connect.qq.com/intro/login
) to finish the following tasks:
1. Register as a developer by using a valid QQ account.
2. Apply the access to the platform for your website. The website is the webpage to which users
are redirected after passing QQ authentication.
You will obtain the APP ID and APP key from the Tencent Open Platform after your application
succeeds.
After a portal user passes QQ authentication, the QQ authentication server sends the authorization
code of the user to the portal Web server. After the portal Web server receives the authorization
code, it sends the authorization code of the user, the APP ID, and the APP key to the QQ
authentication server for verification. If the information is verified as correct, the device determines
that the user passes QQ authentication.
Examples
# Specify 101235509 as the APP ID for QQ authentication.
<Sysname> system-view
[Sysname] portal extend-auth-server qq
[Sysname-portal-extend-auth-server-qq] app-id 101235509
Related commands
display portal extend-auth-server
To Next Page
Loading...
Need help?
General
