H3C MSR Series Command Reference

505
Predefined user roles
network-admin
Parameters
ip: Specifies a source IPv4 address.
ipv6: Specifies a source IPv6 address.
ip-address: Specifies the IPv4 or IPv6 address.
interface interface-type interface-number: Specifies an interface by its type and number. The
interface's primary IP address will be used as the source IP address for PKI protocol packets.
Usage guidelines
Use this command to specify the source IP address for PKI protocol packets. You can also specify a
source interface if the IP address is dynamically obtained.
Make sure there is a route between the source IP address and the CA server.
You can specify only one source IP address in a PKI domain. If you execute this command multiple
times, the most recent configuration takes effect.
Examples
# Set the source IP address to 111.1.1.8 for PKI protocol packets.
<Sysname> system-view
[Sysname] pki domain aaa
[Sysname-pki-domain-aaa] source ip 111.1.1.8
# Set the source IPv6 address to 1::8 for PKI protocol packets.
<Sysname> system-view
[Sysname] pki domain 1
[Sysname-pki-domain-1] source ipv6 1::8
# Set the source interface to GigabitEthernet 1/0/1 for PKI protocol packets.
<Sysname> system-view
[Sysname] pki domain aaa
[Sysname-pki-domain-aaa] source ip interface gigabitethernet 1/0/1
# Set the source IP address to the IPv6 address of GigabitEthernet 1/0/1 for PKI protocol packets.
<Sysname> system-view
[Sysname] pki domain 1
[Sysname-pki-domain-1] source ipv6 interface gigabitethernet 1/0/1
state
Use state to set the state or province name for a PKI entity.
Use undo state to restore the default.
Syntax
state state-name
undo state
Default
No state name or province name is set for a PKI entity.
Views
PKI entity view

H3C MSR Series Specifications

General

Category	Network Router
IPv6 Support	Yes
Dimensions	Varies by model
Weight	Varies by model
Product Type	Modular Router
Ports	Varies by model
WAN Interfaces	Varies by model
Firewall	Yes
QoS	Yes
Wireless Support	Varies by model
USB Ports	Varies by model
Console Port	Yes
Power Supply	Varies by model
Redundancy	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing
Series	MSR
Certifications	CE, FCC, RoHS