842
Type
Application protocol type:
• Pre-defined.
• User-defined.
App ID/Application ID ID of the application protocol.
Tunnel
Whether or not the protocol is a tunnel protocol:
• Yes.
• No.
Encrypted
Whether or not the protocol is a cryptographic protocol:
• Yes.
• No.
DetectLen
Length of data to be inspected for application recognition. The
length can be predefined or user defined.
The measurement unit is byte.
Related commands
app-group
include
display application statistics
Use display application statistics to display statistics for the specified application protocols.
Syntax
Centralized devices in standalone mode:
display application statistics [ direction { inbound | outbound } | interface interface-type
interface-number | name application-name ] *
Distributed devices in standalone mode/centralized devices in IRF mode:
display application statistics [ direction { inbound | outbound } | interface interface-type
interface-number [ slot slot-number ] | name application-name ] *
Distributed devices in IRF mode:
display application statistics [ direction { inbound | outbound } | interface interface-type
interface-number [ chassis chassis-number slot slot-number ] | name application-name ] *
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
direction: Specifies the direction of the interface.
inbound: Specifies the inbound direction.
outbound: Specifies the outbound direction.
interface interface-type interface-number: Specifies an interface by its type and number.