992
Table 152 Command output
IP address Protected IPv4 address.
VPN
MPLS L3VPN instance to which the protected IPv4 address belongs. If the
protected IPv4 address is on the public network, this field displays
hyphens (--).
Detected on Where the attack is detected, on the device (
Local
) or an interface.
Detect type Type of the detected flood attack.
State
Whether the interface or device is attacked:
• Attacked.
• Normal.
PPS Number of packets sent to the IPv4 address per second.
Dropped Number of attack packets dropped by the interface or the device.
Totally 2 flood entries Total number of IPv4 addresses that are protected.
display attack-defense flood statistics ipv6
Use display attack-defense flood statistics ipv6 to display IPv6 flood attack detection and
prevention statistics.
Syntax
Centralized devices in standalone mode:
display attack-defense { ack-flood | dns-flood | fin-flood | flood | http-flood | icmpv6-flood |
rst-flood | syn-ack-flood | syn-flood | udp-flood } statistics ipv6 [ ipv6-address [ vpn
vpn-instance-name ] ] [ interface interface-type interface-number | local ] [ count ]
Distributed devices in standalone mode/centralized devices in IRF mode:
display attack-defense { ack-flood | dns-flood | fin-flood | flood | http-flood | icmpv6-flood |
rst-flood | syn-ack-flood | syn-flood | udp-flood } statistics ipv6 [ ipv6-address [ vpn
vpn-instance-name ] ] [ [ interface interface-type interface-number | local ] [ slot slot-number ] ]
[ count ]
Distributed devices in IRF mode:
display attack-defense { ack-flood | dns-flood | fin-flood | flood | http-flood | icmpv6-flood |
rst-flood | syn-ack-flood | syn-flood | udp-flood } statistics ipv6 [ ipv6-address [ vpn
vpn-instance-name ] ] [ [ interface interface-type interface-number | local ] [ chassis
chassis-number slot slot-number ] ] [ count ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
ack-flood: Specifies ACK flood attack.
dns-flood: Specifies DNS flood attack.
fin-flood: Specifies FIN flood attack.