H3C MSR Series Command Reference

600
fqdn fqdn-name: Uses an FQDN as the local ID. The fqdn-name argument is a case-sensitive string
of 1 to 255 characters, such as www.test.com. If you do not specify this argument, the device name
configured by using the sysname command is used as the local FQDN.
user-fqdn user-fqdn-name: Uses a user FQDN as the local ID. The user-fqdn-name argument is a
case-sensitive string of 1 to 255 characters, such as adc@test.com. If you do not specify this
argument, the device name configured by using the sysname command is used as the user FQDN.
Usage guidelines
For digital signature authentication, the device can use any type of ID. For pre-shared key
authentication, the device can use any type of ID other than the DN.
In digital signature authentication, if the local ID is an IP address that is different from the IP address
in the local certificate, the device uses its FQDN instead. The FQDN is the device name configured
by using the sysname command.
An IKE profile can have only one local ID.
An IKE profile with no local ID specified uses the local ID configured by using the ike identity
command in system view.
Examples
# Set the local ID to IP address 2.2.2.2.
<Sysname> system-view
[Sysname] ike profile prof1
[Sysname-ike-profile-prof1] local-identity address 2.2.2.2
Related commands
match remote
ike identity
match local address (IKE keychain view)
Use match local address to specify a local interface or IP address to which an IKE keychain can be
applied.
Use undo match local address to restore the default.
Syntax
match local address { interface-type interface-number | { ipv4-address | ipv6 ipv6-address }
[ vpn-instance vpn-instance-name ] }
undo match local address
Default
An IKE keychain can be applied to any local interface or IP address.
Views
IKE keychain view
Predefined user roles
network-admin
Parameters
interface-type interface-number: Specifies a local interface. It can be any Layer 3 interface.
ipv4-address: Specifies the IPv4 address of a local interface.
ipv6 ipv6-address: Specifies the IPv6 address of a local interface.

H3C MSR Series Specifications

General

Category	Network Router
IPv6 Support	Yes
Dimensions	Varies by model
Weight	Varies by model
Product Type	Modular Router
Ports	Varies by model
WAN Interfaces	Varies by model
Firewall	Yes
QoS	Yes
Wireless Support	Varies by model
USB Ports	Varies by model
Console Port	Yes
Power Supply	Varies by model
Redundancy	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing
Series	MSR
Certifications	CE, FCC, RoHS