H3C MSR Series Command Reference

302
Name
Number
Description
UpLinkFlux 6 Uplink (output) traffic of the user, an 8-byte unsigned integer, in KB.
DownLinkFlux 7 Downlink (input) traffic of the user, an 8-byte unsigned integer, in KB.
Port 8 A string excluding the end character '\0'.
IP-Config 9
This attribute has different meanings in different types of packets.
• The device uses this attribute in ACK _AUTH (Type=0x04)
packets to notify the portal server that the user requires re-DHCP.
• The device uses this attribute in ACK_LOGOUT (Type=0x06) and
NTF_LOGOUT (Type=0x08) packets to indicate that the current
user IP address must be released. The portal server must notify
the user to release the public IP address through DHCP. The
device will reallocate a private IP address to the user.
BAS-IP 10
IP address of the access device. For re-DHCP portal authentication,
the value of this attribute is the public IP address of the access device.
Session-ID 11
Identification of a portal user. Generally, the value of this attribute is the
MAC address of the portal user.
Delay-Time 12
Delay time for sending a packet. This attributes exists in
NTF_LOGOUT (Type=0x08) packets.
User-List 13 List of IP addresses of an IPv4 portal user.
EAP-Message 14
An EAP attribute that needs to be transported transparently. This
attribute is applicable to EAP TLS authentication. Multiple
EAP-Message attributes can exist in a portal authentication packet.
User-Notify 15
Value of the hw_User_Notify attribute in a RADIUS accounting
response. This attribute needs to be transported transparently.
BAS-IPv6 100 IPv6 address of the access device.
UserIPv6-List 101 List of IPv6 addresses of an IPv6 portal user.
Examples
# Exclude the UpLinkFlux attribute (number 6) from portal ACK_AUTH packets.
<Sysname> system-view
[Sysname] portal server pts
[Sysname-portal-server-pts] exclude-attribute 6 ack-auth
Related commands
display portal server
free-traffic threshold
Use free-traffic threshold to specify the free-traffic threshold for portal users.
Use undo free-traffic threshold to restore the default.
Syntax
free-traffic threshold value
undo free-traffic threshold
Default
The free-traffic threshold is 0 bytes.

H3C MSR Series Specifications

General

Category	Network Router
IPv6 Support	Yes
Dimensions	Varies by model
Weight	Varies by model
Product Type	Modular Router
Ports	Varies by model
WAN Interfaces	Varies by model
Firewall	Yes
QoS	Yes
Wireless Support	Varies by model
USB Ports	Varies by model
Console Port	Yes
Power Supply	Varies by model
Redundancy	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing
Series	MSR
Certifications	CE, FCC, RoHS