H3C MSR Series

921
Related commands
connection-limit
limit
connection-limit apply global
Use connection-limit apply global to apply a connection limit policy globally.
Use undo connection-limit apply global to remove the application.
Syntax
connection-limit apply global { ipv6-policy | policy } policy-id
undo connection-limit apply global { ipv6-policy | policy }
Default
No connection limit policy is applied globally.
Views
System view
Predefined user roles
network-admin
Parameters
ipv6-policy: Specifies an IPv6 connection limit policy.
policy: Specifies an IPv4 connection limit policy.
policy-id: Specifies the ID of a connection limit policy. The value range for this argument is 1 to 32.
Usage guidelines
Only one IPv4 connection limit policy and one IPv6 connection limit policy can be applied globally. A
new IPv4 or IPv6 connection limit policy overwrites the old one.
Examples
# Apply IPv4 connection limit policy 1 globally.
<Sysname> system-view
[Sysname] connection-limit apply global policy 1
# Apply IPv6 connection limit policy 12 globally.
<Sysname> system-view
[Sysname] connection-limit apply global ipv6-policy 12
Related commands
connection-limit
limit
description
Use description to configure a description for a connection limit policy.
Use undo description to restore the default.
Syntax
description text