H3C MSR Series Command Reference

685
Examples
# Enable the SSH server to support SSH1 clients.
<Sysname> system-view
[Sysname] ssh server compatible-ssh1x enable
Related commands
display ssh server
ssh server dscp
Use ssh server dscp to set the DSCP value in the IPv4 SSH packets that the SSH server sends to
SSH clients.
Use undo ssh server dscp to restore the default.
Syntax
ssh server dscp dscp-value
undo ssh server dscp
Default
The DSCP value is 48 in IPv4 SSH packets.
Views
System view
Predefined user roles
network-admin
Parameters
dscp-value: Specifies the DSCP value in the IPv4 SSH packets, in the range of 0 to 63. A bigger
DSCP value represents a higher priority.
Usage guidelines
The DSCP value of a packet specifies the priority of the packet and affects the transmission priority
of the packet.
Examples
# Set the DSCP value to 30 for IPv4 SSH packets.
<Sysname> system-view
[Sysname] ssh server dscp 30
ssh server enable
Use ssh server enable to enable the Stelnet server.
Use undo ssh server enable to disable the Stelnet server.
Syntax
ssh server enable
undo ssh server enable
Default
The Stelnet server is disabled.

H3C MSR Series Specifications

General

Category	Network Router
IPv6 Support	Yes
Dimensions	Varies by model
Weight	Varies by model
Product Type	Modular Router
Ports	Varies by model
WAN Interfaces	Varies by model
Firewall	Yes
QoS	Yes
Wireless Support	Varies by model
USB Ports	Varies by model
Console Port	Yes
Power Supply	Varies by model
Redundancy	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing
Series	MSR
Certifications	CE, FCC, RoHS