H3C MSR Series Command Reference

980
Related commands
display attack-defense top-attack-statistics
blacklist enable
Use blacklist enable to enable the blacklist feature on an interface.
Use undo blacklist enable to disable the blacklist feature on an interface.
Syntax
blacklist enable
undo blacklist enable
Default
The blacklist feature is disabled on an interface.
Views
Interface view
Predefined user roles
network-admin
Usage guidelines
If the global blacklist feature is enabled, the blacklist feature is enabled on all interfaces. If the global
blacklist feature is disabled, you can use this command to enable the blacklist feature on individual
interfaces.
Examples
# Enable the blacklist feature on interface GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] blacklist enable
Related commands
blacklist ip
blacklist ipv6
blacklist global enable
Use blacklist global enable to enable the global blacklist feature.
Use undo blacklist global enable to disable the global blacklist feature.
Syntax
blacklist global enable
undo blacklist global enable
Default
The global blacklist feature is disabled.
Views
System view

H3C MSR Series Specifications

General

Category	Network Router
IPv6 Support	Yes
Dimensions	Varies by model
Weight	Varies by model
Product Type	Modular Router
Ports	Varies by model
WAN Interfaces	Varies by model
Firewall	Yes
QoS	Yes
Wireless Support	Varies by model
USB Ports	Varies by model
Console Port	Yes
Power Supply	Varies by model
Redundancy	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing
Series	MSR
Certifications	CE, FCC, RoHS