H3C MSR Series Command Reference

736
Usage guidelines
An SSL VPN username cannot carry ISP domain information. After this command is executed, an
SSL VPN gateway uses the specified ISP domain for authentication, authorization, and accounting
of SSL VPN users in the context.
Examples
# Specify ISP domain myserver for authentication, authorization, and accounting of SSL VPN users
in SSL VPN context ctx1.
<Sysname> system-view
[Sysname] sslvpn context ctx1
[Sysname-sslvpn-context-ctx1] aaa domain myserver
bandwidth
Use bandwidth to set the expected bandwidth for an interface.
Use undo bandwidth to restore the default.
Syntax
bandwidth bandwidth-value
undo bandwidth
Default
The expected bandwidth is 64 kbps for an interface.
Views
SSL VPN AC interface view
Predefined user roles
network-admin
Parameters
bandwidth-value: Specifies the expected bandwidth in the range of 1 to 400000000 kbps.
Usage guidelines
The expected bandwidth for an interface affects CBQ bandwidth and link costs in OSPF, OSPFv3,
and IS-IS. For more information about CBQ bandwidth, see ACL and QoS Configuration Guide. For
more information about link costs, see Layer 3—IP Routing Configuration Guide.
Examples
# Set the expected bandwidth to 10000 kbps for SSL VPN AC 1000.
<Sysname> system-view
[Sysname] interface sslvpn-ac 1000
[Sysname-SSLVPN-AC1000] bandwidth 10000
certificate-authentication enable
Use certificate-authentication enable to enable certificate authentication.
Use undo certificate-authentication enable to disable certificate authentication.
Syntax
certificate-authentication enable
undo certificate-authentication enable

H3C MSR Series Specifications

General

Category	Network Router
IPv6 Support	Yes
Dimensions	Varies by model
Weight	Varies by model
Product Type	Modular Router
Ports	Varies by model
WAN Interfaces	Varies by model
Firewall	Yes
QoS	Yes
Wireless Support	Varies by model
USB Ports	Varies by model
Console Port	Yes
Power Supply	Varies by model
Redundancy	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing
Series	MSR
Certifications	CE, FCC, RoHS