H3C MSR Series

767
interface sslvpn-ac
Use interface sslvpn-ac to create an SSL VPN AC interface and enter its view, or enter the view of
an existing SSL VPN AC interface.
Use undo interface sslvpn-ac to delete an SSL VPN AC interface.
Syntax
interface sslvpn-ac interface-number
undo interface sslvpn-ac interface-number
Default
No SSL VPN AC interfaces exist.
Views
System view
Predefined user roles
network-admin
Parameters
interface-number: Specifies an SSL VPN AC interface number in the range of 0 to 4095.
Examples
# Create interface SSL VPN AC 1000 and enter its view.
<Sysname>system-view
[Sysname]interface SSLVPN-AC 1000
[Sysname-SSLVPN-AC1000]
ip address
Use ip address to configure an IPv4 address and a port number for an SSL VPN gateway.
Use undo ip address to restore the default.
Syntax
ip address ip-address [ port port-number ]
undo ip address
Default
An SSL VPN gateway uses IPv4 address 0.0.0.0 and port number 443.
Views
SSL VPN gateway view
Predefined user roles
network-admin
Parameters
ip-address: Specifies an IPv4 address for the SSL VPN gateway, in dotted decimal notation.
port port-number: Specifies a port number for the SSL VPN gateway. The port number is 443 (the
default value) or in the range of 1025 to 65535.