H3C MSR Series

74
Default
The setting is 24 hours.
Views
System view
Predefined user roles
network-admin
Parameters
time-value: Sets the waiting-approval timeout timer in the range of 1 to 720, in hours.
Usage guidelines
The waiting-approval timeout timer starts when the registration request of a local guest is sent for
approval. If the request is not approved within the timer, the device deletes the registration request.
Examples
# Set the waiting-approval timeout timer to 12 hours.
<Sysname> system-view
[Sysname] local-guest timer waiting-approval 12
local-user
Use local-user to add a local user and enter its view, or enter the view of an existing local user.
Use undo local-user to delete local users.
Syntax
local-user user-name [ class { manage | network [ guest ] } ]
undo local-user { user-name class { manage | network [ guest ] } | all [ service-type { advpn | ftp
| http | https | ike | ipoe | lan-access | pad | portal | ppp | ssh | sslvpn | telnet | terminal } | class
{ manage | network [ guest ] } ] }
Default
No local users exist.
Views
System view
Predefined user roles
network-admin
Parameters
user-name: Specifies the local user name, a case-sensitive string of 1 to 55 characters that does not
contain the domain name. The name cannot contain a forward slash (/), backslash (\), vertical bar (|),
colon (:), asterisk (*), question mark (?), left angle bracket (<), right angle bracket (>), or at sign (@).
The name also cannot be a, al, or all.
class: Specifies the local user type.
manage: Device management user that can configure and monitor the device after login. Device
management users can use FTP, HTTP, HTTPS, Telnet, SSH, terminal, and PAD services.
network: Network access user that accesses network resources through the device. Network
access users can use ADVPN, IKE, IPoE, LAN access, portal, PPP, and SSL VPN services.
guest: Guest that can access network resources through the device during a specific validity period.
Guests can use LAN and portal services.