H3C MSR Series

87
Default
The accounting-on feature is disabled.
Views
RADIUS scheme view
Predefined user roles
network-admin
Parameters
interval interval: Specifies the time interval for retransmitting an accounting-on packet in seconds.
The value range for the interval argument is 1 to 15, and the default setting is 3 seconds.
send send-times: Specifies the maximum number of accounting-on packet transmission attempts.
The value range for the send-times argument is 1 to 255, and the default setting is 50.
Usage guidelines
The accounting-on feature enables the device to automatically send an accounting-on packet to the
RADIUS server after a device reboot. Upon receiving the accounting-on packet, the RADIUS server
logs out all online users so they can log in again through the device.
Execute the save command to ensure that the accounting-on enable command takes effect at the
next reboot. For information about the save command, see Fundamentals Command Reference.
Parameters set by using the accounting-on enable command take effect immediately.
Examples
# Enable the accounting-on feature for RADIUS scheme radius1, and set the retransmission interval
to 5 seconds and the transmission attempts to 15.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] accounting-on enable interval 5 send 15
Related commands
display radius scheme
accounting-on extended
Use accounting-on extended to enable the extended accounting-on feature.
Use undo accounting-on extended to disable the extended accounting-on feature.
Syntax
accounting-on extended
undo accounting-on extended
Default
The extended accounting-on feature is disabled.
Views
RADIUS scheme view
Predefined user roles
network-admin
network-operator