H3C MSR Series Command Reference

1091
[Sysname-attack-defense-policy-atk-policy-1] rst-flood threshold 100
Related commands
udp-flood action
udp-flood detect
udp-flood detect non-specific
whitelist enable
Use whitelist enable to enable the whitelist feature on an interface.
Use undo whitelist enable to disable the whitelist feature on an interface.
Syntax
whitelist enable
undo whitelist enable
Default
The whitelist feature is disabled on an interface.
Views
Interface view
Predefined user roles
network-admin
Usage guidelines
If the global whitelist feature is enabled, the whitelist feature is enabled on all interfaces. If the global
whitelist feature is disabled, you can use this command to enable the whitelist feature on individual
interfaces.
Examples
# Enable the whitelist feature on interface GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] whitelist enable
whitelist global enable
Use whitelist global enable to enable the global whitelist feature.
Use undo whitelist global enable to disable the global whitelist feature.
Syntax
whitelist global enable
undo whitelist global enable
Default
The global whitelist feature is disabled.
Views
System view

H3C MSR Series Specifications

General

Category	Network Router
IPv6 Support	Yes
Dimensions	Varies by model
Weight	Varies by model
Product Type	Modular Router
Ports	Varies by model
WAN Interfaces	Varies by model
Firewall	Yes
QoS	Yes
Wireless Support	Varies by model
USB Ports	Varies by model
Console Port	Yes
Power Supply	Varies by model
Redundancy	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing
Series	MSR
Certifications	CE, FCC, RoHS