H3C MSR Series Command Reference

810
[Sysname-zone-pair-security-Trust-Untrust] aspf apply policy 1
Related commands
aspf policy
display aspf all
zone-pair security (Fundamentals Command Reference)
aspf icmp-error reply
Use aspf icmp-error reply to enable the device to send ICMP error messages for packet dropping
by security policies applied to zone pairs.
Use undo aspf icmp-error reply to restore the default.
Syntax
aspf icmp-error reply
undo aspf icmp-error reply
Default
The device does not send ICMP error messages when the device drops packets that do not match
security policies applied to zone pairs.
Views
System view
Predefined user roles
network-admin
Usage guidelines
Typically, to reduce useless packets transmitted over the network and save bandwidth, do not use
this command.
However, you must use this command when you use traceroute, for ICMP error messages in this
situation are required.
Examples
# Enable ICMP error message sending for packet dropping by security policies applied to zone pairs.
<Sysname> system-view
[Sysname] aspf icmp-error reply
aspf policy
Use aspf policy to create an ASPF policy and enter its view, or enter the view of an existing ASPF
policy.
Use undo aspf policy to remove an ASPF policy.
Syntax
aspf policy aspf-policy-number
undo aspf policy aspf-policy-number
Default
No ASPF policies exist.

H3C MSR Series Specifications

General

Category	Network Router
IPv6 Support	Yes
Dimensions	Varies by model
Weight	Varies by model
Product Type	Modular Router
Ports	Varies by model
WAN Interfaces	Varies by model
Firewall	Yes
QoS	Yes
Wireless Support	Varies by model
USB Ports	Varies by model
Console Port	Yes
Power Supply	Varies by model
Redundancy	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing
Series	MSR
Certifications	CE, FCC, RoHS