H3C MSR Series Command Reference

176
Examples
# Enable the multicast trigger feature on GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] dot1x multicast-trigger
Related commands
display dot1x
dot1x timer tx-period
dot1x unicast-trigger
dot1x port-control
Use dot1x port-control to set the authorization state for the port.
Use undo dot1x port-control to restore the default.
Syntax
dot1x port-control { authorized-force | auto | unauthorized-force }
undo dot1x port-control
Default
The default port authorization state is auto.
Views
Ethernet interface view
Predefined user roles
network-admin
Parameters
authorized-force: Places the port in authorized state, enabling users on the port to access the
network without authentication.
auto: Places the port initially in unauthorized state to allow only EAPOL packets to pass, and places
the port in authorized state after a user passes authentication. You can use this option in most
scenarios.
unauthorized-force: Places the port in unauthorized state, denying any access requests from users
on the port.
Usage guidelines
You can use this command to set the port authorization state to determine whether a client is granted
access to the network.
Examples
# Set the authorization state of port GigabitEthernet 1/0/1 to unauthorized-force.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] dot1x port-control unauthorized-force
Related commands
display dot1x

H3C MSR Series Specifications

General

Category	Network Router
IPv6 Support	Yes
Dimensions	Varies by model
Weight	Varies by model
Product Type	Modular Router
Ports	Varies by model
WAN Interfaces	Varies by model
Firewall	Yes
QoS	Yes
Wireless Support	Varies by model
USB Ports	Varies by model
Console Port	Yes
Power Supply	Varies by model
Redundancy	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing
Series	MSR
Certifications	CE, FCC, RoHS