EasyManuals Logo

H3C MSR Series Command Reference

H3C MSR Series
1187 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #34 background imageLoading...
Page #34 background image
11
accounting when the RADIUS server is invalid. The device does not perform accounting when both
of the previous methods are invalid.
The following guidelines apply to broadcast accounting:
The device sends accounting requests to the primary accounting servers in the specified
broadcast RADIUS schemes at the same time. If a primary server is unavailable, the device
sends accounting requests to the secondary servers of the scheme in the order the servers are
configured.
The accounting result is determined by the primary broadcast RADIUS scheme. The
accounting result from the backup scheme is used as reference only. If the primary scheme
does not return any result, the device considers the accounting as a failure.
Examples
# In ISP domain test, perform local accounting for portal users.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] accounting portal local
# In ISP domain test, perform RADIUS accounting for portal users based on scheme rd and use
local accounting as the backup.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] accounting portal radius-scheme rd local
# In ISP domain test, broadcast accounting requests of portal users to RADIUS servers in schemes
rd1 and rd2, and use local accounting as the backup.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] accounting portal broadcast radius-scheme rd1 radius-scheme rd2 local
Related commands
accounting default
local-user
radius scheme
accounting ppp
Use accounting ppp to specify accounting methods for PPP users.
Use undo accounting ppp to restore the default.
Syntax
In non-FIPS mode:
accounting ppp { broadcast radius-scheme radius-scheme-name1 radius-scheme
radius-scheme-name2 [ hwtacacs-scheme hwtacacs-scheme-name ] [ local ] [ none ] |
hwtacacs-scheme hwtacacs-scheme-name [ radius-scheme radius-scheme-name ] [ local ]
[ none ] | local [ none ] | none | radius-scheme radius-scheme-name [ hwtacacs-scheme
hwtacacs-scheme-name ] [ local ] [ none ] }
undo accounting ppp
In FIPS mode:
accounting ppp { broadcast radius-scheme radius-scheme-name1 radius-scheme
radius-scheme-name2 [ hwtacacs-scheme hwtacacs-scheme-name ] [ local ] | hwtacacs-scheme
hwtacacs-scheme-name [ radius-scheme radius-scheme-name ] [ local ] | local | radius-scheme
radius-scheme-name [ hwtacacs-scheme hwtacacs-scheme-name ] [ local ] }

Table of Contents

Other manuals for H3C MSR Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the H3C MSR Series and is the answer not in the manual?

H3C MSR Series Specifications

General IconGeneral
CategoryNetwork Router
IPv6 SupportYes
DimensionsVaries by model
WeightVaries by model
Product TypeModular Router
PortsVaries by model
WAN InterfacesVaries by model
FirewallYes
QoSYes
Wireless SupportVaries by model
USB PortsVaries by model
Console PortYes
Power SupplyVaries by model
RedundancyVaries by model
Operating Temperature0°C to 45°C
Storage Temperature-40°C to 70°C
Humidity5% to 95% non-condensing
SeriesMSR
CertificationsCE, FCC, RoHS

Related product manuals