EasyManuals Logo

H3C MSR Series Command Reference

H3C MSR Series
1187 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #222 background imageLoading...
Page #222 background image
199
Syntax
mac-authentication host-mode multi-vlan
undo mac-authentication host-mode
Default
MAC authentication multi-VLAN mode is disabled on a port. When the port receives a packet
sourced from an authenticated MAC address in a VLAN not matching the existing MAC-VLAN
mapping, the device logs off and reauthenticates the user.
Views
Ethernet interface view
Predefined user roles
network-admin
Usage guidelines
The MAC authentication multi-VLAN mode prevents an authenticated online user from service
interruption caused by VLAN changes on a port. When the port receives a packet sourced from the
user in a VLAN not matching the existing MAC-VLAN mapping, the device neither logs off the user
nor reauthenticates the user. The device creates a new MAC-VLAN mapping for the user, and traffic
transmission is not interrupted. The original MAC-VLAN mapping for the user remains on the device
until it dynamically ages out. As a best practice, configure this feature on hybrid or trunk ports.
This feature improves transmission of data that is vulnerable to delay and interference. It is typically
applicable to IP phone users.
Examples
# Enable MAC authentication multi-VLAN mode on GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] mac-authentication host-mode multi-vlan
Related commands
display mac-authentication
mac-authentication max-user
Use mac-authentication max-user to set the maximum number of concurrent MAC authentication
users on a port.
Use undo mac-authentication max-user to restore the default.
Syntax
mac-authentication max-user max-number
undo mac-authentication max-user
Default
The device allows a maximum of 4294967295 concurrent MAC authentication users on a port.
Views
Ethernet interface view
Predefined user roles
network-admin

Table of Contents

Other manuals for H3C MSR Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the H3C MSR Series and is the answer not in the manual?

H3C MSR Series Specifications

General IconGeneral
CategoryNetwork Router
IPv6 SupportYes
DimensionsVaries by model
WeightVaries by model
Product TypeModular Router
PortsVaries by model
WAN InterfacesVaries by model
FirewallYes
QoSYes
Wireless SupportVaries by model
USB PortsVaries by model
Console PortYes
Power SupplyVaries by model
RedundancyVaries by model
Operating Temperature0°C to 45°C
Storage Temperature-40°C to 70°C
Humidity5% to 95% non-condensing
SeriesMSR
CertificationsCE, FCC, RoHS

Related product manuals