EasyManuals Logo

H3C MSR Series Command Reference

H3C MSR Series
1187 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #239 background imageLoading...
Page #239 background image
216
Views
Layer 2 Ethernet interface view
Predefined user roles
network-admin
Parameters
blockmac: Adds the source MAC addresses of illegal frames to the blocked MAC address list and
discards frames with blocked source MAC addresses. This action implements illegal traffic filtering
on the port. A blocked MAC address is restored to normal after being blocked for 3 minutes, which is
not user configurable. To display the blocked MAC address list, use the display port-security
mac-address block command.
disableport: Disables the port permanently upon detecting an illegal frame received on the port.
disableport-temporarily: Disables the port for a period of time whenever it receives an illegal frame.
You can use the port-security timer disableport command to set the period.
Usage guidelines
This command is supported only on the following ports:
Layer 2 Ethernet ports on the following modules:
HMIM-8GSW.
HMIM-24GSW.
HMIM-24GSWP.
SIC-4GSW.
Fixed Layer 2 Ethernet ports on the following routers:
MSR810/810-W/810-W-DB/810-LM/810-W-LM/810-LM-HK/810-W-LM-HK/810-10-PoE/81
0-LMS/810-LUS.
MSR2600-10-X1.
MSR3600-28/3600-51.
MSR3600-28-SI/3600-51-SI.
To restore the connection of the port disabled by the intrusion protection feature, use the undo
shutdown command.
Examples
# Configure GigabitEthernet 1/0/1 to block the source MAC addresses of illegal frames after intrusion
protection detects the illegal frames.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] port-security intrusion-mode blockmac
Related commands
display port-security
display port-security mac-address block
port-security timer disableport
port-security mac-address aging-type inactivity
Use port-security mac-address aging-type inactivity to enable inactivity aging for secure MAC
addresses.
Use undo port-security mac-address aging-type inactivity to disable inactivity aging for secure
MAC addresses.

Table of Contents

Other manuals for H3C MSR Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the H3C MSR Series and is the answer not in the manual?

H3C MSR Series Specifications

General IconGeneral
CategoryNetwork Router
IPv6 SupportYes
DimensionsVaries by model
WeightVaries by model
Product TypeModular Router
PortsVaries by model
WAN InterfacesVaries by model
FirewallYes
QoSYes
Wireless SupportVaries by model
USB PortsVaries by model
Console PortYes
Power SupplyVaries by model
RedundancyVaries by model
Operating Temperature0°C to 45°C
Storage Temperature-40°C to 70°C
Humidity5% to 95% non-condensing
SeriesMSR
CertificationsCE, FCC, RoHS

Related product manuals