EasyManuals Logo

H3C MSR Series Command Reference

H3C MSR Series
1187 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #352 background imageLoading...
Page #352 background image
329
[SysnameGigabitEthernet1/0/1] portal authorization acl strict-checking
# Enable strict checking on authorized ACLs on service template service1. (Wireless application.)
<Sysname> system-view
[Sysname] wlan service-template service1
[Sysname-wlan-st-service1] portal authorization acl strict-checking
Related commands
display portal
portal captive-bypass optimize delay
Use portal captive-bypass optimize delay to set the captive-bypass detection timeout time.
Use undo portal captive-bypass optimize delay to restore the default.
Syntax
portal captive-bypass optimize delay seconds
undo portal captive-bypass optimize delay
Default
The captive-bypass detection timeout time is 6 seconds.
Views
System view
Predefined user roles
network-admin
Parameters
seconds: Specifies the captive-bypass detection timeout time, in the range of 6 to 60 seconds.
Usage guidelines
This command applies only to iOS mobile clients.
With optimized captive-bypass enabled, the device automatically pushes the portal authentication
page to iOS mobile devices when they are connected to the network. Users can perform
authentication on the page or press the home button to return to the desktop without performing
authentication, and the Wi-Fi connection is not terminated.
Optimized captive-bypass might fail when the network condition is poor. The device cannot detect a
server reachability detection packet from an iOS mobile device within the captive-bypass detection
timeout time. Therefore, the Wi-Fi connection will be terminated on the iOS mobile device. To avoid
Wi-Fi disconnections caused by server reachability detection failure, you can set a longer
captive-bypass detection timeout time when the network condition is poor.
Examples
# Set the captive-bypass detection timeout time to 20 seconds.
<Sysname> system-view
[Sysname] portal captive-bypass optimize delay 20
Related commands
captive-bypass enable

Table of Contents

Other manuals for H3C MSR Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the H3C MSR Series and is the answer not in the manual?

H3C MSR Series Specifications

General IconGeneral
CategoryNetwork Router
IPv6 SupportYes
DimensionsVaries by model
WeightVaries by model
Product TypeModular Router
PortsVaries by model
WAN InterfacesVaries by model
FirewallYes
QoSYes
Wireless SupportVaries by model
USB PortsVaries by model
Console PortYes
Power SupplyVaries by model
RedundancyVaries by model
Operating Temperature0°C to 45°C
Storage Temperature-40°C to 70°C
Humidity5% to 95% non-condensing
SeriesMSR
CertificationsCE, FCC, RoHS

Related product manuals