H3C MSR Series

1067
reset attack-defense statistics interface
Use reset attack-defense statistics interface to clear attack detection and prevention statistics for
an interface.
Syntax
reset attack-defense statistics interface interface-type interface-number
Views
User view
Predefined user roles
network-admin
Parameters
interface-type interface-number: Specifies an interface by its type and number.
Examples
# Clear attack detection and prevention statistics for interface GigabitEthernet 1/0/1.
<Sysname> reset attack-defense statistics interface gigabitethernet 1/0/1
Related commands
display attack defense policy
reset attack-defense statistics local
Use reset attack-defense statistics local to clear attack detection and prevention statistics for the
device.
Syntax
reset attack-defense statistics local
Views
User view
Predefined user roles
network-admin
Examples
Clear attack detection and prevention statistics for the device.
<Sysname> reset attack-defense statistics local
Related commands
display attack-defense statistics local
reset attack-defense top-attack-statistics
Use reset attack-defense top-attack-statistics to clear top 10 attack statistics.
Syntax
reset attack-defense top-attack-statistics
Views
User view