1153
reset nhrp statistics
Use reset nhrp statistics to clear NHRP packet statistics.
Syntax
reset nhrp statistics [ interface tunnel interface-number ]
Views
User view
Predefined user roles
network-admin
Parameters
interface tunnel interface-number: Specifies an mGRE tunnel interface by its number in the range
of 0 to 4095. If you do not specify this option, the command clears NHRP packet statistics for all
mGRE tunnel interfaces.
Examples
# Clear NHRP packet statistics for interface Tunnel1.
<Sysname> reset nhrp statistics interface tunnel 1
Related commands
display nhrp statistics
To Next Page
Loading...
