H3C MSR Series

805
Default
No URL lists exist.
Views
SSL VPN context view
Predefined user roles
network-admin
Parameters
name: Specifies a name for the URL list, a case-insensitive string of 1 to 31 characters.
Examples
# Create a URL list named url1 and enter URL list view.
<Sysname> system-view
[Sysname] sslvpn context ctx1
[Sysname-sslvpn-context-ctx1] url-list url1
[Sysname-sslvpn-context-ctx1-url-list-url1]
Related commands
sslvpn context
verify-code
Use verify-code enable to enable code verification.
Use undo verify-code enable to disable code verification.
Syntax
verify-code enable
undo verify-code enable
Default
Code verification is disabled.
Views
SSL VPN context view
Predefined user roles
network-admin
Usage guidelines
After code verification is enabled, a user must enter a correct verification code to log in to the SSL
VPN webpage.
Examples
# Enable code verification.
<Sysname> system-view
[Sysname] sslvpn context ctx
[Sysname-sslvpn-context-ctx] verify-code enable
vpn-instance (SSL VPN context view)
Use vpn-instance to associate an SSL VPN context with a VPN instance.