H3C MSR Series

726
Predefined user roles
network-admin
network-operator
Parameters
policy-name: Specifies an SSL client policy by its name, a case-insensitive string of 1 to 31
characters. If you do not specify a policy name, this command displays information about all SSL
client policies.
Examples
# Display information about SSL client policy policy1.
<Sysname> display ssl client-policy policy1
SSL client policy: policy1
SSL version: SSL 3.0
PKI domain: client-domain
Preferred ciphersuite:
RSA_AES_128_CBC_SHA
Server-verify: enabled
Table 104 Command output
Field
Description
Server-verify
Indicates whether the client is enabled to use digital certificates to
authenticate servers.
display ssl server-policy
Use display ssl server-policy to display SSL server policy information.
Syntax
display ssl server-policy [ policy-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
policy-name: Specifies an SSL server policy by its name, a case-insensitive string of 1 to 31
characters. If you do not specify a policy name, this command displays information about all SSL
server policies.
Examples
# Display information about SSL server policy policy1.
<Sysname> display ssl server-policy policy1
SSL server policy: policy1
PKI domain: server-domain
Ciphersuites:
DHE_RSA_AES_128_CBC_SHA
RSA_AES_128_CBC_SHA