H3C MSR Series Command Reference

960
move rule
Use move rule to change the rule match order of a rule in an object policy.
Syntax
move rule rule-id before insert-rule-id
Views
Object policy view
Predefined user roles
network-admin
Parameters
rule-id: Specifies a rule by its ID in the range of 0 to 65534.
insert-rule-id: Specifies the ID of the target rule before which a rule is inserted. The target rule ID is in
the range of 0 to 65535. If you specify 65535 as the target rule ID, the rule is moved to the end of the
list.
Usage guidelines
The system does not execute the command in the following situations:
• You specify the same value for the rule-id and insert-rule-id arguments.
• You specify a nonexistent rule.
Examples
# Insert rule 5 before rule 2 for IPv4 object policy permit.
<Sysname> system-view
[Sysname] object-policy ip permit
[Sysname-object-policy-ip-permit] move rule 5 before 2
Related commands
object-policy apply ipv6
object-policy ip
rule (IPv4 object policy view)
rule (IPv6 object policy view)
object-policy apply ip
Use object-policy apply ip to apply an IPv4 object policy to a zone pair.
Use undo object-policy apply ip to restore the default.
Syntax
object-policy apply ip object-policy-name
undo object-policy apply ip object-policy-name
Default
IPv4 object policies are not applied to a zone pair.
Views
Zone pair view

H3C MSR Series Specifications

General

Category	Network Router
IPv6 Support	Yes
Dimensions	Varies by model
Weight	Varies by model
Product Type	Modular Router
Ports	Varies by model
WAN Interfaces	Varies by model
Firewall	Yes
QoS	Yes
Wireless Support	Varies by model
USB Ports	Varies by model
Console Port	Yes
Power Supply	Varies by model
Redundancy	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing
Series	MSR
Certifications	CE, FCC, RoHS