H3C MSR Series Command Reference

649
priority (IKEv2 profile view)
Use priority to set a priority for an IKEv2 profile.
Use undo priority to restore the default.
Syntax
priority priority
undo priority
Default
The priority of an IKEv2 profile is 100.
Views
IKEv2 profile view
Predefined user roles
network-admin
Parameters
priority: Specifies the priority of the IKEv2 profile, in the range of 1 to 65535. A smaller number
represents a higher priority.
Usage guidelines
The priority set by this command can only be used to adjust the match order of IKEv2 profiles.
Examples
# Set the priority to 10 for the IKEv2 profile profile1.
<Sysname> system-view
[Sysname] ikev2 profile profile1
[Sysname-ikev2-profile-profile1] priority 10
proposal
Use proposal to specify an IKEv2 proposal for an IKEv2 policy.
Use undo proposal to remove an IKEv2 proposal from an IKEv2 policy.
Syntax
proposal proposal-name
undo proposal proposal-name
Default
No IKEv2 proposal is specified for an IKEv2 policy.
Views
IKEv2 policy view
Predefined user roles
network-admin
Parameters
proposal-name: Specifies an IKEv2 proposal by its name, a case-insensitive string of 1 to 63
characters.

H3C MSR Series Specifications

General

Category	Network Router
IPv6 Support	Yes
Dimensions	Varies by model
Weight	Varies by model
Product Type	Modular Router
Ports	Varies by model
WAN Interfaces	Varies by model
Firewall	Yes
QoS	Yes
Wireless Support	Varies by model
USB Ports	Varies by model
Console Port	Yes
Power Supply	Varies by model
Redundancy	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing
Series	MSR
Certifications	CE, FCC, RoHS