834
Parameters
text: Specifies a description, a case-sensitive string of 1 to 127 characters.
Usage guidelines
The following matrix shows the command and hardware compatibility:
MSR810/810-W/810-W-DB/810-LM/810-W-LM/810-10-PoE/810-LM
-HK/810-W-LM-HK
Yes
MSR810-LMS/810-LUS No
MSR2600-10-X1 Yes
MSR 2630 Yes
MSR3600-28/3600-51 Yes
MSR3600-28-SI/3600-51-SI No
MSR3610-X1/3610-X1-DP/3610-X1-DC/3610-X1-DP-DC Yes
MSR 3610/3620/3620-DP/3640/3660 Yes
MSR5620/5660/5680 Yes
Configure descriptions for different user-defined NBAR rules for identification and management
purposes.
Examples
# Configure a description for user-defined NBAR rule abcd.
<Sysname> system-view
[Sysname] nbar application abcd protocol http
[Sysname-nbar-application-abcd] description "A user-defined application based on HTTP"
Related commands
nbar application
destination
Use destination to specify a destination IP address or subnet as a match criterion in a user-defined
NBAR rule.
Use undo destination to restore the default.
Syntax
destination { ip ipv4-address [ mask-length ] | ipv6 ipv6-address [ prefix-length ] }
undo destination
Default
A user-defined NBAR rule matches packets destined for all IP addresses.
Views
NBAR rule view
Predefined user roles
network-admin
To Next Page
Loading...
