H3C MSR Series Command Reference

712
Default
The source IPv4 address for SSH packets is not configured. The Stelnet client uses the primary IPv4
address of the output interface in the routing entry as the source address of the SSH packets.
Views
System view
Predefined user roles
network-admin
Parameters
interface interface-type interface-number: Specifies a source interface by its type and number. The
SSH packets use the primary IPv4 address of the interface as their source address.
ip ip-address: Specifies a source IPv4 address.
Usage guidelines
If you execute this command multiple times, the most recent configuration takes effect.
This command takes effect on all Stelnet connections. The source IPv4 address specified in the
ssh2 command takes effect only on the current Stelnet connection.
If you specify the source IPv4 address both in this command and the ssh2 command, the source
IPv4 address specified in the ssh2 command takes effect.
Examples
# Specify 192.168.0.1 as the source IPv4 address for SSH packets.
<Sysname> system-view
[Sysname] ssh client source ip 192.168.0.1
Related commands
display ssh client source
ssh2
Use ssh2 to establish a connection to an IPv4 Stelnet server.
Syntax
In non-FIPS mode:
ssh2 server [ port-number ] [ vpn-instance vpn-instance-name ] [ identity-key { dsa | ecdsa | rsa }
| prefer-compress zlib | prefer-ctos-cipher { 3des-cbc | aes128-cbc | aes256-cbc | des-cbc } |
prefer-ctos-hmac { md5 | md5-96 | sha1 | sha1-96 } | prefer-kex { dh-group-exchange-sha1 |
dh-group1-sha1 | dh-group14-sha1 } | prefer-stoc-cipher { 3des-cbc | aes128-cbc | aes256-cbc
| des-cbc } | prefer-stoc-hmac { md5 | md5-96 | sha1 | sha1-96 } ] * [ dscp dscp-value | escape
character | public-key keyname | source { interface interface-type interface-number | ip
ip-address } ] *
In FIPS mode:
ssh2 server [ port-number ] [ vpn-instance vpn-instance-name ] [ identity-key { ecdsa | rsa } |
prefer-compress zlib | prefer-ctos-cipher { aes128-cbc | aes256-cbc } | prefer-ctos-hmac
{ sha1 | sha1-96 } | prefer-kex dh-group14-sha1 | prefer-stoc-cipher { aes128-cbc |
aes256-cbc } | prefer-stoc-hmac { sha1 | sha1-96 } ] * [ escape character | public-key keyname |
source { interface interface-type interface-number | ip ip-address } ] *
Views
User view

H3C MSR Series Specifications

General

Category	Network Router
IPv6 Support	Yes
Dimensions	Varies by model
Weight	Varies by model
Product Type	Modular Router
Ports	Varies by model
WAN Interfaces	Varies by model
Firewall	Yes
QoS	Yes
Wireless Support	Varies by model
USB Ports	Varies by model
Console Port	Yes
Power Supply	Varies by model
Redundancy	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing
Series	MSR
Certifications	CE, FCC, RoHS