H3C MSR Series Command Reference

962
Examples
# Configure an IPv6 object policy and apply it to a zone pair.
<Sysname> system-view
[Sysname] object-policy ipv6 permit
[Sysname-object-policy-ipv6-permit] quit
[Sysname] zone-pair security source office destination library
[Sysname-zone-pair-security-office-library] object-policy apply ipv6 permit
Related commands
display object-policy zone-pair security
object-policy apply ip
object-policy ipv6
object-policy ip
Use object-policy ip to configure an IPv4 object policy and enter its view, or enter the view of an
existing IPv4 object policy.
Use undo object-policy ip to delete an IPv4 object policy.
Syntax
object-policy ip object-policy-name
undo object-policy ip object-policy-name
Default
No IPv4 object policies exist.
Views
System view
Predefined user roles
network-admin
Parameters
object-policy-name: Specifies an IPv4 object policy name, a case-insensitive string of 1 to 63
characters.
Usage guidelines
The IPv4 object policy name is unchangeable once configured.
You cannot delete an IPv4 object policy that has been applied to a zone pair.
Examples
# Configure an IPv4 object policy and enter its view.
<Sysname> system-view
[Sysname] object-policy ip permit
[Sysname-object-policy-ip-permit] rule pass
Related commands
display object-policy ip
object-policy ipv6

H3C MSR Series Specifications

General

Category	Network Router
IPv6 Support	Yes
Dimensions	Varies by model
Weight	Varies by model
Product Type	Modular Router
Ports	Varies by model
WAN Interfaces	Varies by model
Firewall	Yes
QoS	Yes
Wireless Support	Varies by model
USB Ports	Varies by model
Console Port	Yes
Power Supply	Varies by model
Redundancy	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing
Series	MSR
Certifications	CE, FCC, RoHS