212
Related commands
port-security intrusion-mode
display port-security mac-address security
Use display port-security mac-address security to display information about secure MAC
addresses.
Syntax
display port-security mac-address security [ interface interface-type interface-number ] [ vlan
vlan-id ] [ count ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Specifies a port by its type and number.
vlan vlan-id: Specifies a VLAN by its ID. The value range is 1 to 4094.
count: Displays only the count of the secure MAC addresses.
Usage guidelines
Secure MAC addresses are those that are automatically learned by the port in autoLearn mode or
configured by the port-security mac-address security command.
If you do not specify any parameters, this command displays information about all secure MAC
addresses.
Examples
# Display information about all secure MAC addresses.
<Sysname> display port-security mac-address security
MAC ADDR VLAN ID STATE PORT INDEX AGING TIME
0002-0002-0002 1 Security GE1/0/1 NOAGED
000d-88f8-0577 1 Security GE1/0/1 28
--- 2 mac address(es) found ---
# Display only the count of the secure MAC addresses.
<Sysname> display port-security mac-address security count
--- 2 mac address(es) found
# Display information about secure MAC addresses in VLAN 1.
<Sysname> display port-security mac-address security vlan 1
MAC ADDR VLAN ID STATE PORT INDEX AGING TIME
0002-0002-0002 1 Security GE1/0/1 NOAGED
000d-88f8-0577 1 Security GE1/0/1 28
--- 2 mac address(es) found ---
# Display information about secure MAC addresses on GigabitEthernet 1/0/1.
To Next Page
Loading...
Need help?
General
