H3C MSR Series

164
dot1x
Use dot1x to enable 802.1X globally or on a port.
Use undo dot1x to disable 802.1X globally or on a port.
Syntax
dot1x
undo dot1x
Default
802.1X is neither enabled globally nor enabled for any port.
Views
System view
Ethernet interface view
Predefined user roles
network-admin
Usage guidelines
802.1X must be enabled both globally and on the intended port. Otherwise, it does not function.
Examples
# Enable 802.1X globally.
<Sysname> system-view
[Sysname] dot1x
# Enable 802.1X on GigabitEthernet 1/0/1.
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] dot1x
[Sysname-GigabitEthernet1/0/1] quit
Related commands
display dot1x
dot1x authentication-method
Use dot1x authentication-method to specify an EAP message handling method.
Use undo dot1x authentication-method to restore the default.
Syntax
dot1x authentication-method { chap | eap | pap }
undo dot1x authentication-method
Default
The access device performs EAP termination and uses CHAP to communicate with the RADIUS
server.
Views
System view
Predefined user roles
network-admin