EasyManuals Logo

H3C MSR Series Command Reference

H3C MSR Series
1187 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #780 background imageLoading...
Page #780 background image
757
Usage guidelines
You can specify both an advanced ACL and a URI ACL for IP access filtering.
The SSL VPN gateway uses the following procedure to determine whether to forward an IP access
request:
1. Matches the request against rules in the URI ACL:
If the request matches a permit rule, the gateway forwards the request.
If the request matches a deny rule, the gateway drops the request.
If the request does not match any rules in the URI ACL or if no URI ACL is available, the
gateway proceeds to step 2.
2. Matches the request against rules in the advanced ACL:
If the request matches a permit rule, the gateway forwards the request.
If the request matches a deny rule, the gateway drops the request.
If the request does not match any rules in the advanced ACL or if no advanced ACL is
available, the gateway drops the request.
You can specify an IPv4 ACL, IPv6 ACL, or both by using this command, but you cannot specify
multiple IPv4 ACLs or IPv6 ACLs. If you specify IPv4 or IPv6 ACLs multiple times, the most recent
IPv4 or IPv6 ACL configuration takes effect.
Examples
# Configure policy group pg1 to use IPv4 ACL 3000 and IPv6 ACL 3500 for IP access filtering.
<Sysname> system-view
[Sysname] sslvpn context ctx1
[Sysname-sslvpn-context-ctx1] policy-group pg1
[Sysname-sslvpn-context-ctx1-policy-group-pg1] filter ip-tunnel acl 3000
[Sysname-sslvpn-context-ctx1-policy-group-pg1] filter ip-tunnel ipv6 acl 3500
Related commands
filter ip-tunnel uri-acl
filter ip-tunnel uri-acl
Use filter ip-tunnel uri-acl to specify a URI ACL for IP access filtering.
Use undo filter ip-tunnel uri-acl to remove the URI ACL configuration for IP access filtering.
Syntax
filter ip-tunnel uri-acl uri-acl-name
undo filter ip-tunnel uri-acl
Default
All IP accesses are denied.
Views
SSL VPN policy group view
Predefined user roles
network-admin
Parameters
uri-acl-name: Specifies a URI ACL by its name, a case-insensitive string of 1 to 31 characters. The
specified URI ACL must already exist.

Table of Contents

Other manuals for H3C MSR Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the H3C MSR Series and is the answer not in the manual?

H3C MSR Series Specifications

General IconGeneral
CategoryNetwork Router
IPv6 SupportYes
DimensionsVaries by model
WeightVaries by model
Product TypeModular Router
PortsVaries by model
WAN InterfacesVaries by model
FirewallYes
QoSYes
Wireless SupportVaries by model
USB PortsVaries by model
Console PortYes
Power SupplyVaries by model
RedundancyVaries by model
Operating Temperature0°C to 45°C
Storage Temperature-40°C to 70°C
Humidity5% to 95% non-condensing
SeriesMSR
CertificationsCE, FCC, RoHS

Related product manuals