EasyManuals Logo

H3C MSR Series Command Reference

H3C MSR Series
1187 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #409 background imageLoading...
Page #409 background image
386
reset portal safe-redirect statistics [ slot slot-number ]
Distributed devices in IRF mode:
reset portal safe-redirect statistics [ chassis chassis-number slot slot-number ]
Views
User view
Predefined user roles
network-admin
Parameters
slot slot-number: Specifies a card by its slot number. If you do not specify a card, this command
clears statistics for all cards. (Distributed devices in standalone mode.)
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command clears statistics for all member devices. (Centralized devices in IRF mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The
chassis-number argument represents the member ID of the IRF member device. The slot-number
argument represents the slot number of the card. If you do not specify a card, this command clears
statistics for all cards. (Distributed devices in IRF mode.)
Examples
# (Centralized devices in standalone mode.) Clear portal safe-redirect packet statistics.
<Sysname> reset portal safe-redirect statistics
# (Distributed devices in standalone mode/centralized devices in IRF mode.) Clear portal
safe-redirect packet statistics on the specified slot.
<Sysname> reset portal safe-redirect statistics slot 0
Related commands
display portal safe-redirect statistics
server-detect (portal authentication server view)
Use server-detect to enable portal authentication server detection. After server detection is enabled
for a portal authentication server, the device periodically detects portal packets from the server to
identify its reachability status.
Use undo server-detect to disable portal authentication server detection.
Syntax
server-detect [ timeout timeout ] log
undo server-detect
Default
Portal authentication server detection is disabled.
Views
Portal authentication server view
Predefined user roles
network-admin
Parameters
timeout timeout: Specifies the detection timeout in the range of 10 to 3600 seconds. The default is
60 seconds.

Table of Contents

Other manuals for H3C MSR Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the H3C MSR Series and is the answer not in the manual?

H3C MSR Series Specifications

General IconGeneral
CategoryNetwork Router
IPv6 SupportYes
DimensionsVaries by model
WeightVaries by model
Product TypeModular Router
PortsVaries by model
WAN InterfacesVaries by model
FirewallYes
QoSYes
Wireless SupportVaries by model
USB PortsVaries by model
Console PortYes
Power SupplyVaries by model
RedundancyVaries by model
Operating Temperature0°C to 45°C
Storage Temperature-40°C to 70°C
Humidity5% to 95% non-condensing
SeriesMSR
CertificationsCE, FCC, RoHS

Related product manuals