H3C MSR Series Command Reference

616
display ikev2 profile
display ikev2 policy
Use display ikev2 policy to display the IKEv2 policy configuration.
Syntax
display ikev2 policy [ policy-name | default ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
policy-name: Specifies an IKEv2 policy by its name, a case-insensitive string of 1 to 63 characters.
default: Specifies the default IKEv2 policy.
Usage guidelines
If you do not specify any parameters, this command displays the configuration of all IKEv2 policies.
Examples
# Display the configuration of all IKEv2 policies.
<Sysname> display ikev2 policy
IKEv2 policy: 1
Priority: 100
Match local address: 1.1.1.1
Match local address ipv6: 1:1::1:1
Match VRF: vpn1
Proposal: 1
Proposal: 2
IKEv2 policy: default
Match VRF: any
Proposal: default
Table 88 Command output
Field
Description
IKEv2 policy Name of the IKEv2 policy.
Priority Priority of the IKEv2 policy.
Match local address IPv4 address to which the IKEv2 policy can be applied.
Match local address ipv6 IPv6 address to which the IKEv2 policy can be applied.
Match VRF VPN instance name to which the IKEv2 policy can be applied.
Proposal IKEv2 proposal that the IKEv2 policy uses.
Related commands
ikev2 policy

H3C MSR Series Specifications

General

Category	Network Router
IPv6 Support	Yes
Dimensions	Varies by model
Weight	Varies by model
Product Type	Modular Router
Ports	Varies by model
WAN Interfaces	Varies by model
Firewall	Yes
QoS	Yes
Wireless Support	Varies by model
USB Ports	Varies by model
Console Port	Yes
Power Supply	Varies by model
Redundancy	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing
Series	MSR
Certifications	CE, FCC, RoHS