839
pre-defined app-group count
Number of predefined application groups in the
application group.
This field is not supported in the current software
version.
Include pre-defined app-group list
List of predefined application groups.
This field is not supported in the current software
version.
App-group name
Name of a predefined application group.
This field is not supported in the current software
version.
App-group ID
ID of a predefined application group.
This field is not supported in the current software
version.
Related commands
app-group
include
display application
Use display application to display information about the specified application protocols.
Syntax
display application [ name application-name | pre-defined | user-defined ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
name application-name: Specifies an application protocol by its name. The application-name
argument is a case-insensitive string of 1 to 63 characters. The names invalid and other are not
allowed.
pre-defined: Specifies the predefined application protocols.
user-defined: Specifies the user-defined application protocols.
Usage guidelines
If you do not specify any parameters, this command displays information about all application
protocols.
Examples
# Display information about all predefined application protocols.
<Sysname> display application pre-defined
Pre-defined count: 817
Application name Type App ID Tunnel Encrypted DetectLen
To Next Page
Loading...
