EasyManua.ls Logo

H3C MSR Series

H3C MSR Series
1187 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
857
<Sysname> system-view
[Sysname] port-mapping application ftp port 3456 host ipv6 1::1
Related commands
display port-mapping user-defined
port-mapping subnet
Use port-mapping subnet to configure a subnet-based host-port mapping.
Use undo port-mapping subnet to remove a subnet-based host-port mapping.
Syntax
port-mapping application application-name port port-number [ protocol protocol-name ] subnet
{ ip ipv4-address { mask-length | mask } | ipv6 ipv6-address prefix-length } [ vpn-instance
vpn-instance-name ]
undo port-mapping application application-name port port-number [ protocol protocol-name ]
subnet { ip ipv4-address { mask-length | mask } | ipv6 ipv6-address prefix-length } [ vpn-instance
vpn-instance-name ]
Default
An application protocol is mapped to a well-known port.
Views
System view
Predefined user roles
network-admin
Parameters
application application-name: Specifies an application protocol by its name, a case-insensitive
string of 1 to 63 characters. The names invalid and other are not allowed.
port port-number: Specifies a port by its number, in the range of 0 to 65535.
protocol protocol-name: Specifies a transport layer protocol by its name, including:
dccp: Specifies DCCP.
sctp: Specifies SCTP.
tcp: Specifies TCP.
udp: Specifies UDP.
udp-lite: Specifies UDP-Lite.
ip ipv4-address { mask-length | mask }: Specifies an IPv4 subnet.
The ipv4-address argument specifies the IPv4 network address.
The mask-length argument specifies the mask length of the IPv4 subnet, in the range of 1 to 32.
The mask argument specifies the subnet mask in dotted decimal notation.
ipv6 ipv6-address prefix-length: Specifies an IPv6 subnet. The ipv6-address argument specifies the
IPv6 network address, and the prefix-length argument specifies the length of the IPv6 prefix, in the
range of 1 to 128.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a
case-sensitive string of 1 to 31 characters. If you configure a mapping for the public network, do not
specify this option.

Table of Contents

Other manuals for H3C MSR Series

Related product manuals