To Next Page

To Previous Page

188

Predefined user roles

network-admin

Parameters

ap ap-name: Specifies an AP by its name, a case-insensitive string of 1 to 64 characters. The string

can contain letters, digits, underscores (_), left brackets ([), right brackets (]), forward slashes (/), and

hyphens (-).If you do not specify an AP, this command clears statistics of 802.1X users for all APs.

radio radio-id: Specifies a radio by its ID. The value range for the radio-id argument varies by device

model. If you do not specify a radio, this command clears 802.1X statistics for all radios on the

specified AP.

interface interface-type interface-number: Specifies a port by its type and number. If you do not

specify a port, this command clears 802.1X statistics on all ports.

Examples

# Clear 802.1X statistics on GigabitEthernet 1/0/1.

<Sysname> reset dot1x statistics interface gigabitethernet 1/0/1

Related commands

display dot1x

Other manuals for H3C MSR Series

Questions and Answers:

Need help?

Do you have a question about the H3C MSR Series and is the answer not in the manual?

General