190
Wired devices:
display mac-authentication [ interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
ap ap-name: Specifies an AP by its name, a case-insensitive string of 1 to 64 characters. The string
can contain letters, digits, underscores (_), left brackets ([), right brackets (]), forward slashes (/), and
hyphens (-). If you do not specify an AP, this command displays MAC authentication settings and
statistics for all APs.
radio radio-id: Specifies a radio by its ID. The value range for the radio-id argument varies by device
model. If you do not specify a radio, this command displays MAC authentication information for all
radios on the specified AP.
interface interface-type interface-number: Specifies a port by its type and number. If you do not
specify a port, this command displays both global and port-specific MAC authentication information.
Examples
# Display all MAC authentication settings and statistics.
<Sysname> display mac-authentication
Global MAC authentication parameters:
MAC authentication : Enabled
User name format : MAC address in lowercase(xxxxxxxxxxxx)
Username : mac
Password : Not configured
Offline detect period : 300 s
Quiet period : 60 s
Server timeout : 100 s
Authentication domain : Not configured, use default domain
Online MAC-auth wired users : 1
Online MAC-auth wireless users : 2
Silent MAC users:
MAC address VLAN ID From port Port index
0001-0000-0005 100 GigabitEthernet1/0/2 21
0001-0000-0006 12 GigabitEthernet1/0/4 301
GigabitEthernet1/0/1 is link-up
MAC authentication : Enabled
Carry User-IP : Disabled
Authentication domain : Not configured
Auth-delay timer : Enabled
Auth-delay period : 60 s
Re-auth server-unreachable : Logoff
Host mode : Multiple VLAN
Max online users : 256
To Next Page
Loading...
