1003
Predefined user roles
network-admin
network-operator
Parameters
policy-name: Specifies an attack defense policy by its name. The policy name is a case-insensitive
string of 1 to 31 characters. Valid characters include uppercase and lowercase letters, digits,
underscores (_), and hyphens (-).
ack-flood: Specifies ACK flood attack.
dns-flood: Specifies DNS flood attack.
fin-flood: Specifies FIN flood attack.
flood: Specifies all IPv6 flood attacks.
http-flood: Specifies HTTP flood attack.
icmpv6-flood: Specifies ICMPv6 flood attack.
rst-flood: Specifies RST flood attack.
syn-ack-flood: Specifies SYN-ACK flood attack.
syn-flood: Specifies SYN flood attack.
udp-flood: Specifies UDP flood attack.
ipv6-address: Specifies a protected IPv6 address. If you do not specify an IPv6 address, this
command displays information about all protected IPv6 addresses.
vpn-instance vpn-instance-name: Specifies the MPLS L3VPN instance to which the IPv6 address
belongs. The vpn-instance-name argument is a case-sensitive string of 1 to 31 characters. Do not
specify this option if the IPv6 address is on the public network.
slot slot-number: Specifies a card by its slot number. If you do not specify a card, this command
displays information about IPv6 addresses protected by flood attack detection and prevention for all
cards. (Distributed devices in standalone mode.)
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command displays information for all IRF member devices. (Centralized devices in IRF
mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The
chassis-number argument represents the member ID of the IRF member device. The slot-number
argument represents the slot number of the card. If you do not specify a card, this command displays
information about IPv6 addresses protected by flood attack detection and prevention for all cards.
(Distributed devices in IRF mode.)
count: Displays the number of matching IPv6 addresses protected by flood attack detection and
prevention.
Examples
# (Centralized devices in standalone mode.) Display information about all IPv6 addresses protected
by flood attack detection and prevention in the attack defense policy abc.
<Sysname> display attack-defense policy abc flood ipv6
IPv6 address VPN instance Type Rate threshold(PPS) Dropped
2013::127f a012345678901234 SYN-ACK-FLOOD 1000 4294967295
2::5 -- ACK-FLOOD 100 10
1::5 -- ACK-FLOOD 100 23
# (Distributed devices in standalone mode/centralized devices in IRF mode.) Display information
about all IPv6 addresses protected by flood attack detection and prevention in the attack defense
policy abc.
To Next Page
Loading...
