1146
network-operator
Parameters
interface tunnel interface-number: Specifies an mGRE tunnel interface by its number in the range
of 0 to 4095. If you do not specify this option, the command displays NHRP mapping table
information for all mGRE tunnel interfaces.
peer ipv4-address: Specifies a peer public address. If you do not specify this option, the command
displays NHRP mapping entries for all peers.
verbose: Displays detailed information about NHRP mapping entries. If you do not specify this
keyword, the command displays brief information about NHRP mapping entries.
Usage guidelines
If you do not specify any parameters, this command displays brief information about all NHRP
mapping entries.
Examples
# Display brief information about all NHRP mapping entries.
<Sysname> display nhrp map
Destination/mask Next hop NBMA address Type Interface
172.16.1.1/32 172.16.1.1 105.112.100.4 cached Tunnel0
172.16.1.2/32 172.16.1.2 105.112.100.92 cached Tunnel0
# Display detailed information about all NHRP mapping entries.
<Sysname> display nhrp map verbose
Interface : Tunnel0
Destination/mask : 172.16.1.1/32
Next hop : 172.16.1.1
Creation time : 00:38:44
Expiration time : 01:21:15
Type : cached
Flags : unique, up, used
NBMA address : 105.112.100.4
Interface : Tunnel0
Destination/mask : 172.16.1.2/32
Next hop : 172.16.1.2
Creation time : 00:25:53
Expiration time : 01:34:06
Type : cached
Flags : unique, up, used, ipsec
NBMA address : 105.112.100.92
Table 181 Command output
Destination/mask
Destination tunnel interface address and mask of the
mapping entry.
Nexthop Next hop address to reach the destination network.
Creation time
Period of time for which the mapping entry has been
created.
To Next Page
Loading...
Need help?
General
