122
Single-connection: Enabled
Primary Author Server:
IP : 2.2.2.2 Port: 49 State: Active
VPN Instance: 2
Single-connection: Disabled
Primary Acct Server:
IP : Not Configured Port: 49 State: Block
VPN Instance: Not configured
Single-connection: Disabled
VPN Instance : 2
NAS IP Address : 2.2.2.3
Server Quiet Period(minutes) : 5
Realtime Accounting Interval(minutes) : 12
Response Timeout Interval(seconds) : 5
Username Format : with-domain
Data flow unit : Byte
Packet unit : one
------------------------------------------------------------------
Table 10 Command output
Index Index number of the HWTACACS scheme.
Primary Auth Server Primary HWTACACS authentication server.
Primary Author Server Primary HWTACACS authorization server.
Primary Acct Server Primary HWTACACS accounting server.
Secondary Auth Server Secondary HWTACACS authentication server.
Secondary Author Server Secondary HWTACACS authorization server.
Secondary Acct Server Secondary HWTACACS accounting server.
IP
IP address of the HWTACACS server. If no server is configured, this
field displays
Not configured
.
Port
Service port of the HWTACACS server. If no port configuration is
performed, this field displays the default port number.
Single-connection
Single connection status:
• Enabled—Establish only one TCP connection for all users to
communicate with the server.
• Disabled—Establish a TCP connection for each user to
communicate with the server.
State Status of the HWTACACS server: active or blocked.
VPN Instance
MPLS L3VPN instance to which the HWTACACS server or scheme
belongs. If no VPN instance is specified for the server or scheme,
this field displays
Not configured
.
NAS IP Address Source IP address for outgoing HWTACACS packets.
Server Quiet Period(minutes) Quiet period for the primary servers, in minutes.
Realtime Accounting
Interval(minutes)
Real-time accounting interval, in minutes.