H3C MSR Series Command Reference

134
ipv6 ipv6-address: Specifies the IPv6 address of the secondary HWTACACS authentication server.
port-number: Specifies the service port number of the secondary HWTACACS authentication server.
The value range for the TCP port number is 1 to 65535. The default setting is 49.
key: Specifies the shared key for secure communication with the secondary HWTACACS
authentication server.
cipher: Specifies the key in encrypted form.
simple: Specifies the key in plaintext form. For security purposes, the key specified in plaintext form
will be stored in encrypted form.
string: Specifies the key. This argument is case sensitive.
• In non-FIPS mode, the encrypted form of the key is a string of 1 to 373 characters. The plaintext
form of the key is a string of 1 to 255 characters.
• In FIPS mode, the encrypted form of the key is a string of 15 to 373 characters. The plaintext
form of the key is a string of 15 to 255 characters. The plaintext string must contain digits,
uppercase letters, lowercase letters, and special characters.
single-connection: The device and the secondary HWTACACS authentication server use the same
TCP connection to exchange all authentication packets for all users. If you do not specify this
keyword, the device establishes a new TCP connection each time it exchanges authentication
packets with the secondary authentication server for a user. As a best practice, specify this keyword
to reduce TCP connections for improving system performance if the HWTACACS server supports
the single-connection method.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance to which the secondary
HWTACACS authentication server belongs. The vpn-instance-name argument is a case-sensitive
string of 1 to 31 characters. If the server is on the public network, do not specify this option.
Usage guidelines
Make sure that the port number and shared key settings of each secondary HWTACACS
authentication server are the same as those configured on the corresponding server.
An HWTACACS scheme supports a maximum of 16 secondary HWTACACS authentication servers.
If the primary server fails, the device tries to communicate with a secondary server in active state.
The device connects to the secondary servers in the order they are configured.
If you do not specify any parameters for the undo secondary authentication command, the
command removes all secondary authentication servers.
Two authentication servers specified for a scheme, primary or secondary, cannot have identical IP
address, port number, and VPN instance settings.
If the specified server resides on an MPLS L3VPN, specify the VPN instance by using the
vpn-instance vpn-instance-name option. The VPN instance specified by this command takes
precedence over the VPN instance specified for the HWTACACS scheme.
You can remove an authentication server only when it is not used for user authentication. Removing
an authentication server affects only authentication processes that occur after the remove operation.
Examples
# In HWTACACS scheme hwt1, specify a secondary authentication server with IP address
10.163.155.13, TCP port number 49, and plaintext shared key 123456TESTauth&!.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] secondary authentication 10.163.155.13 49 key simple
123456TESTauth&!
Related commands
display hwtacacs scheme

H3C MSR Series Specifications

General

Category	Network Router
IPv6 Support	Yes
Dimensions	Varies by model
Weight	Varies by model
Product Type	Modular Router
Ports	Varies by model
WAN Interfaces	Varies by model
Firewall	Yes
QoS	Yes
Wireless Support	Varies by model
USB Ports	Varies by model
Console Port	Yes
Power Supply	Varies by model
Redundancy	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing
Series	MSR
Certifications	CE, FCC, RoHS