157
Error packets: 0
Online 802.1X users: 1
MAC address Auth state
0001-0000-0002 Authenticated
Table 13 Command output
Global 802.1X parameters Global 802.1X configuration.
802.1X authentication Whether 802.1X is enabled globally.
CHAP authentication
Performs EAP termination and uses CHAP to communicate with the
RADIUS server.
If EAP or PAP is enabled, this field is not available.
EAP authentication
Relays EAP packets and supports any of the EAP authentication
methods to communicate with the RADIUS server.
If CHAP or PAP is enabled, this field is not available.
PAP authentication
Performs EAP termination and uses PAP to communicate with the
RADIUS server.
If CHAP or EAP is enabled, this field is not available.
Max-tx period Username request timeout timer in seconds.
Handshake period Handshake timer in seconds.
Quiet timer Status of the quiet timer, enabled or disabled.
Quiet period Quiet timer in seconds.
Supp timeout Client timeout timer in seconds.
Server timeout Server timeout timer in seconds.
Reauth period Periodic reauthentication timer in seconds.
Max auth requests
Maximum number of attempts for sending an authentication request
to a client.
SmartOn switch ID Switch ID for SmartOn authentication.
SmartOn supp timeout SmartOn client timeout timer in seconds.
SmartOn retry counts
Maximum number of attempts for retransmitting an
EAP-Request/Notification packet to a client.
EAD assistant function Whether EAD assistant is enabled.
URL
Redirect URL for unauthenticated users using a Web browser to
access the network.
Free IP Network segment accessible to unauthenticated users.
EAD timeout EAD rule timer in minutes.
Domain delimiter Domain delimiters supported by the device.
Online 802.1X wired users
Number of wired online 802.1X users, including users that have
passed 802.1X authentication and users that are performing 802.1X
authentication.
Online 802.1X wireless users
Number of wireless online 802.1X users, including users that have
passed 802.1X authentication and users that are performing 802.1X
authentication.
GigabitEthernet1/0/1 is link-up Status of the port. In this example, GigabitEthernet 1/0/1 is up.