H3C MSR Series

441
Generating Keys...
.++++++++++++++++++++++++++++++++++++++++++++++++++*
........+......+.....+......................................+..+................
.......+..........+..............+.............+...+.....+...............+..+...
...+.................+..........+...+....+.......+.....+............+.........+.
........................+........+..........+..............+.....+...+..........
..............+.........+..........+...........+........+....+..................
.....+++++++++++++++++++++++++++++++++++++++++++++++++++*
Create the key pair successfully.
# Create a local ECDSA key pair with the default name.
<Sysname> system-view
[Sysname] public-key local create ecdsa
Generating Keys...
Create the key pair successfully.
# Create a local RSA key pair named rsa1.
<Sysname> system-view
[Sysname] public-key local create rsa name rsa1
The range of public key modulus is (512 ~ 2048).
If the key modulus is greater than 512, it will take a few minutes.
Press CTRL+C to abort.
Input the modulus length [default = 1024]:
Generating Keys...
...++++++
...............................++++++
Create the key pair successfully.
# Create a local DSA key pair named dsa1.
<Sysname> system-view
[Sysname] public-key local create dsa name dsa1
The range of public key modulus is (512 ~ 2048).
If the key modulus is greater than 512, it will take a few minutes.
Press CTRL+C to abort.
Input the modulus length [default = 1024]:
Generating Keys...
.++++++++++++++++++++++++++++++++++++++++++++++++++*
........+......+.....+......................................+..+................
.......+..........+..............+.............+...+.....+...............+..+...
...+.................+..........+...+....+.......+.....+............+.........+.
........................+........+..........+..............+.....+...+..........
..............+.........+..........+...........+........+....+..................
.....+++++++++++++++++++++++++++++++++++++++++++++++++++*
Create the key pair successfully.
# Create a local ECDSA key pair named ecdsa1.
<Sysname> system-view
[Sysname] public-key local create ecdsa name ecdsa1
Generating Keys...
Create the key pair successfully.
# In FIPS mode, create a local RSA key pair with the default name.