524
Encapsulation failure: 0
Decapsulation failure: 0
Replayed packets: 0
ACL check failure: 45
MTU check failure: 0
Loopback limit exceeded: 0
Crypto speed limit exceeded: 0
# Display statistics for the packets of IPsec tunnel 1.
<Sysname> display ipsec statistics tunnel-id 1
IPsec packet statistics:
Received/sent packets: 5124/8231
Received/sent bytes: 52348/64356
Dropped packets (received/sent): 0/0
Dropped packets statistics
No available SA: 0
Wrong SA: 0
Invalid length: 0
Authentication failure: 0
Encapsulation failure: 0
Decapsulation failure: 0
Replayed packets: 0
ACL check failure: 0
MTU check failure: 0
Loopback limit exceeded: 0
Crypto speed limit exceeded: 0
Table 81 Command output
Received/sent packets Number of received/sent IPsec-protected packets.
Received/sent bytes Number of bytes of received/sent IPsec-protected packets.
Dropped packets (received/sent) Number of dropped IPsec-protected packets (received/sent).
No available SA Number of packets dropped due to lack of available IPsec SA.
Wrong SA Number of packets dropped due to wrong IPsec SA.
Invalid length Number of packets dropped due to invalid packet length.
Authentication failure Number of packets dropped due to authentication failure.
Encapsulation failure Number of packets dropped due to encapsulation failure.
Decapsulation failure Number of packets dropped due to decapsulation failure.
Replayed packets Number of dropped replayed packets.
ACL check failure Number of packets dropped due to ACL check failure.
MTU check failure Number of packets dropped due to MTU check failure.
Loopback limit exceeded Number of packets dropped due to loopback limit exceeded.
Crypto speed limit exceeded
Number of packets dropped due to crypto speed limit
exceeded.
To Next Page
Loading...
Need help?
General
