40
inbound: Specifies the upload rate of users.
outbound: Specifies the download rate of users.
cir committed-information-rate: Specifies the committed information rate in kbps, in the range of 1 to
4194303.
pir peak-information-rate: Specifies the peak information rate in kbps, in the range of 1 to 4194303.
If you do not specify this option, the CAR action does not restrict users by peak information rate.
idle-cut minute: Sets an idle timeout period in minutes. The value range for the minute argument is 1
to 600. This option is applicable only to IPoE, portal, PPP, and wireless LAN users.
flow: Specifies the minimum traffic that must be generated in the idle timeout period in bytes. The
value range is 1 to 10240000, and the default value is 10240.
igmp max-access-number max-access-number: Specifies the maximum number of IGMP groups
that an IPv4 user can join concurrently. The value range for the max-access-number argument is 1 to
64. This option is applicable only to IPoE, portal, and PPP users.
ip-pool pool-name: Specifies an IPv4 address pool for users. The pool-name argument is a
case-insensitive string of 1 to 63 characters. This option is applicable only to IKE, IPoE, portal, and
PPP users.
ipv6-pool ipv6-pool-name: Specifies an IPv6 address pool for users. The ipv6-pool-name argument
is a case-insensitive string of 1 to 63 characters. This option is applicable only to IPoE, portal, and
PPP users.
ipv6-prefix ipv6-prefix prefix-length: Specifies an IPv6 address prefix for users. The value range for
the ipv6-prefix prefix-length argument is 1 to 128. This option is applicable only to IPoE and PPP
users.
mld max-access-number max-access-number: Specifies the maximum number of MLD groups
that an IPv6 user can join concurrently. The value range for the max-access-number argument is 1 to
64. This option is applicable only to IPoE, portal, and PPP users.
primary-dns ip ipv4-address: Specifies the IPv4 address of the primary DNS server for users. This
option is applicable only to IPoE and PPP users.
primary-dns ipv6 ipv6-address: Specifies the IPv6 address of the primary DNS server for users.
This option is applicable only to IPoE and PPP users.
secondary-dns ip ipv4-address: Specifies the IPv4 address of the secondary DNS server for users.
This option is applicable only to IPoE and PPP users.
secondary-dns ipv6 ipv6-address: Specifies the IPv6 address of the secondary DNS server for
users. This option is applicable only to IPoE and PPP users.
session-group-profile session-group-profile-name: Specifies an authorization session group
profile for users. The session-group-profile-name argument is a case-sensitive string of 1 to 31
characters. Typically, the attribute applies to authenticated users. If you configure the attribute in a
portal preauthentication domain, the session group profile applies before portal authentication. This
option is applicable only to IPoE, portal, and PPP users.
session-timeout minutes: Specifies the session timeout timer for users, in minutes. The value range
for the minutes argument is 1 to 4294967295. The device logs off a user when the user's session
timeout timer expires. This option is applicable only to PPP, portal, IPoE, and LAN users.
url url-string: Specifies the URL to which PPP users are redirected after they pass authentication.
The url-string argument is a case-sensitive string of 1 to 255 characters. This option is applicable
only to PPP users.
user-group user-group-name: Specifies a user group for users. The user-group-name argument is a
case-insensitive string of 1 to 32 characters. Authenticated users obtain all attributes of the user
group.
user-profile profile-name: Specifies an authorization user profile. The profile-name argument is a
case-sensitive string of 1 to 31 characters. Typically, the attribute applies to authenticated users. If
To Next Page
Loading...
Need help?
General
