622
Auth verify method: Pre-shared key
Integrity algorithm: HMAC_MD5
PRF algorithm: HMAC_MD5
Encryption algorithm: AES-CBC-192
Life duration: 86400 secs
Remaining key duration: 85604 secs
Diffie-Hellman group: MODP1024/Group2
NAT traversal: Not detected
DPD: Interval 30 secs, retry interval 10 secs
Transmitting entity: Initiator
Local window: 1
Remote window: 1
Local request message ID: 2
Remote request message ID: 2
Local next message ID: 0
Remote next message ID: 0
Pushed IP address: 192.168.1.5
Assigned IP address: 192.168.2.24
Table 92 Command output
Tunnel ID ID of the IPsec tunnel to which the IKEv2 SA belongs.
Local IP/Port IP address and port number of the local security gateway.
Remote IP/Port IP address and port number of the remote security gateway.
Outside VRF
Name of the VPN instance to which the protected outbound
data flow belongs.
If the protected outbound data flow belongs to the public
network, this field displays a hyphen (
-
).
Inside VRF
Name of the VPN instance to which the protected inbound data
flow belongs.
If the protected inbound data flow belongs to the public
network, this field displays a hyphen (
-
).
Local SPI SPI that the local end uses.
Remote SPI SPI that the remote end uses.
Local ID type ID type of the local security gateway.
Local ID ID of the local security gateway.
Remote ID type ID type of the remote security gateway.
Remote ID ID of the remote security gateway.
Auth sign method
Signature method that the IKEv2 proposal uses in
authentication.
Auth verify method
Verification method that the IKEv2 proposal uses in
authentication.
Integrity algorithm Integrity protection algorithms that the IKEv2 proposal uses.