H3C MSR Series Command Reference

734
undo version
Default
The SSL protocol version for an SSL client policy is TLS 1.0.
Views
SSL client policy view
Predefined user roles
network-admin
Parameters
ssl3.0: Specifies SSL 3.0.
tls1.0: Specifies TLS 1.0.
Usage guidelines
If you execute this command multiple times, the most recent configuration takes effect.
You can specify SSL 3.0 or TLS 1.0 for an SSL client policy:
• If TLS 1.0 is specified and SSL 3.0 is not disabled, the client first uses TLS 1.0 to connect to the
SSL server. If the connection attempt fails, the client uses SSL 3.0.
• If TLS 1.0 is specified and SSL 3.0 is disabled, the client only uses TLS 1.0 to connect to the
SSL server.
• If SSL 3.0 is specified, the client uses SSL 3.0 to connect to the SSL server, whether you disable
SSL 3.0 or not.
As a best practice to enhance system security, disable SSL 3.0 on the device and specify TLS 1.0 for
an SSL client policy.
Examples
# Set the SSL protocol version to TLS 1.0 for SSL client policy policy1.
<Sysname> system-view
[Sysname] ssl client-policy policy1
[Sysname-ssl-client-policy-policy1] version tls1.0
Related commands
display ssl client-policy

H3C MSR Series Specifications

General

Category	Network Router
IPv6 Support	Yes
Dimensions	Varies by model
Weight	Varies by model
Product Type	Modular Router
Ports	Varies by model
WAN Interfaces	Varies by model
Firewall	Yes
QoS	Yes
Wireless Support	Varies by model
USB Ports	Varies by model
Console Port	Yes
Power Supply	Varies by model
Redundancy	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing
Series	MSR
Certifications	CE, FCC, RoHS