EasyManuals Logo

H3C MSR Series Command Reference

H3C MSR Series
1187 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #917 background imageLoading...
Page #917 background image
894
argument represents the slot number of the card. If you do not specify a card, this command displays
information for all cards. (Distributed devices in IRF mode.)
source-ip start-source-ip [ end-source-ip ]: Specifies a source IPv6 address or IPv6 address range
for a multicast session from the initiator to the responder. The start source-ip argument specifies the
start source IPv6 address. The end source-ip argument specifies the end source IPv6 address.
destination-ip start-destination-ip [ end-destination-ip ]: Specifies a destination IPv6 address or
IPv6 address range for a multicast session from the initiator to the responder. The start destination-ip
argument specifies the start destination IPv6 address. The end destination-ip argument specifies the
end destination IPv6 address.
protocol { dccp | icmpv6 | raw-ip | sctp | tcp | udp | udp-lite }: Specifies an IPv6 transport layer
protocol, including DCCP, ICMPv6, RawIP, SCTP, TCP, UDP, and UDP-Lite.
source-port source-port: Specifies a source port by its number. The source-port argument specifies
the source port of a multicast session from the initiator to the responder. The value range for the
source-port argument is 0 to 65535.
destination-port destination-port: Specifies a destination port by its number. The destination-port
argument specifies the destination port of a multicast session from the initiator to the responder. The
value range for the destination-port argument is 0 to 65535.
verbose: Displays detailed information about IPv6 multicast session entries. If you do not specify
this keyword, the command displays brief information about IPv6 multicast session entries.
Usage guidelines
If you do not specify any parameters, this command displays all IPv6 multicast session entries.
Examples
# (Centralized devices in standalone mode.) Display brief information about all IPv6 multicast
session entries.
<Sysname> display session table multicast ipv6
Slot 0:
Inbound initiator:
Source IP/port: 3::4/1617
Destination IP/port: FF0E::1/1025
DS-Lite tunnel peer: -
VPN instance/VLAN ID/Inline ID: -/-/-
Protocol: UDP(17)
Inbound interface: GigabitEthernet1/0/1
Outbound interface list:
GigabitEthernet1/0/2
GigabitEthernet1/0/3
Total sessions found: 3
# (Distributed devices in standalone mode/centralized devices in IRF mode.) Display brief
information about all IPv6 multicast session entries.
<Sysname> display session table multicast ipv6
Slot 0:
Total sessions found: 0
Slot 1:
Total sessions found: 0
Slot 2:

Table of Contents

Other manuals for H3C MSR Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the H3C MSR Series and is the answer not in the manual?

H3C MSR Series Specifications

General IconGeneral
CategoryNetwork Router
IPv6 SupportYes
DimensionsVaries by model
WeightVaries by model
Product TypeModular Router
PortsVaries by model
WAN InterfacesVaries by model
FirewallYes
QoSYes
Wireless SupportVaries by model
USB PortsVaries by model
Console PortYes
Power SupplyVaries by model
RedundancyVaries by model
Operating Temperature0°C to 45°C
Storage Temperature-40°C to 70°C
Humidity5% to 95% non-condensing
SeriesMSR
CertificationsCE, FCC, RoHS

Related product manuals